Many of you already know it, I am slightly obsessed with using cardboard for as many projects as I can think. Right now I am in the middle of finishing up my studio, it has taken me a while, I though I was going to be done before Conner was born, on my last month of pregnancy I worked on a lot of different projects for this space, but I didn't finish. So now that finally the cold of the winter is over I feel more comfortable going down there (the heating system there is not very efficient) with my baby boy.
If you follow me on instagram you have probably seen little sneak peeks of how this place is coming along and the things I've been working on. So today (without showing much about the space that is not finish) I wanted to share a solution for storage and organizing using recycled materials.
HowJoyful blog is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed for sites to earn advertising fees by linking to Amazon products. The prices are the same to you, but I receive a small commission that supports my blog if you use my links.
For more information, see my full disclosure page.
I collected a lot of cardboard boxes with the purchases for my shop and another (very exciting) project I'm working on right now, so I decided to make custom sized storage boxes for a cabinet that I have in the studio. Don't get me wrong, I actually searched everywhere for something that would fit there: Ikea, thrift store, Target, TJ-Maxx, everywhere!! but nothing had the measurements I needed, my space was too “custom”, so of course I decided to make them instead =]
The grand total for the 8 boxes I made is $26, but that's because I wanted pretty card holders so I could write what each box contains. The only things I purchased where the nickel card holders and a gift wrapping paper on sale from Target, everything else was around my studio.
- Lots of cardboard
- Box cutter or x-acto knife
- Kraft paper gummed tape
- Wrapping paper or paint
- ModPodge if you use wrapping paper
- Nickel plated card holders
- Double sided sticky tape (the one I used is high contact so I am not 100% sure this one will work as well, I bought mine at my local scrapbooking store and it's a local brand)
I actually explained in detail how I made the boxes I used to restore an old wire storage cube, in this case the process I follow was EXACLY the same, but instead of using those measurements I used the space I needed to fill to make my boxes, I left an inch and a half on the top and half an inch on the side (from the total measurement) so that the boxes would not fit too tight.
For the pink boxes on the cabinet I used the box from conner's high chair, it was a super sturdy cardboard, so I didn't need to double that one, but the bottoms are normal cardboard, so for those I used a double layer.
One of the reasons I could not fit anything that fit the shelve perfectly was that right in the middle there is a small piece that runs through the back of the cabinet, to solve that I made a “cut” one the back of the center cubes, so now they fit like a glove =]
To ad the card holders I actually used the double sided sticky tape, the holders come in packs of 25 and come with tiny little screws that would work perfect if the boxes were made out of wood, but since it's cardboard I just used the tape all the way around the edges, as I mention in the material's list, I got mine at my local scrapbooking store and it's suposed to be high contact, it bonds after 24 hours. I haven't read the one I linked so I am not sure if it works that way too, I've had the boxes for about a month now and it's working great!
I've only used 8 card holders so far, so it breaks down to a little bit more than a dollar a card holder, witch is not bad, because I'm planning on using most of them in handmade boxes in the studio.
Here you can see a little better the space I was trying to fill, I would have probably choose a different pattern for the boxes, but HEY! blame it on Target's wrapping paper sale =]
I also made taller boxes for my shipping station, I'm still not done with that space but you can see the boxes in the images below. I painted them instead of using wrapping paper and it's actually a lot faster, I used the same paint as in my walls, just thin layers so that the boxes will not get all bended.
I am very happy about how the boxes turn out and they fit the spaces I needed beautifully! I am excited to get the studio done so I can show you all, but for now I'll just share projects along the way =]
And remember if you have a tricky spot you want to organize with boxes but haven't found anything that fits, cardboard might be the solution!
I hope you all have a wonderful day!!